V3 Update 10 Aug.16.2023

[David]

Update10 - Use in-sim update method

• Fixed an error that could happen when adding an EOT to a train, causing it to remove itself a few seconds later. This could happen if another loco in the train had a built-in EOT set on the network. Now, any preexisting EOT in the train (built-in or otherwise) is automatically removed
• There is a new sub-menu called "About" in the Overhead Options menu
  • It shows the current version number of the sim
  • It also allows you to open and read the V3 Change Log PDF (assuming your Windows has a default program for opening PDF files)
• GCOR Signals: If your current signal is a diverging aspect with the next signal being a Restricting, your current signal will now show Diverging Approach instead of Approach Restricting
• San Bernardino Sub
  • Added missing 2nd signal head on Main 2 EB to CP Arlington
  • Fixed dark intermediate signals east of CP Montclair (Alhambra Sub)
  • Fixed track-speeds over switches at CP Soto, CP Garfield, and CP East Industry
  • At Los Nietos, the WB single-head signal now displays according to the next signal at DT Jct; the EB singlehead signal only clears to a Restricting
  • Added missing numberboards on intermediate signals between CP Esperanza and CP Prado
• Roseville Sub
• Fixed a couple signal misconfigurations at East Sparks on the yard-track signals
• Added missing Defect Detectors at:
  • 485.3 tracks 1 & 2
  • 214.3 tracks 1 & 2
  • 249.9
• Industry Configs now have a new car-type Aggregate Hopper, and there is a new Train Class for UnitAggregate in the AI Trains menu. You can use the new H9\Ortner Hoppers from Mixed Freight Pack 4 for these trains & industries
• Corrected another condition that could cause EOTs to disappear when attempting to attach
• Industry Config Menu: Fixed unwanted camera (WASD) movement when typing into a text-box
• Host Password: If a client attempts to join the Host using the wrong password, the Host log now shows the attempted password in the error message
• DS Screen: Train Data Tags now display below the occupied block if there's not enough room above (the
  upper edge was getting cut off along the top edge of the DS screen)
• Automatic AI Spawning
  • Automatic Spawning is now delayed a few seconds while Otto is executing a new routing
  • Track and signal checks were added to prevent conflicting trains on the same track
• Otto:Fixed another condition that could result in mis-routed trains (thanks Jeff Acurso)